Thanks for printing! Don't forget to come back to Trenton Systems Inc. for fresh articles!
BPG6600 PCI Express Backplane
Trenton’s BPG6600 PCI Express backplane supports a single-processor single board computer, one IOB33 PCIe link expansion module, two PCI Express and ten PCI-X/PCI plug-in I/O cards. The unique backplane design places the PICMG® 1.3 single board computer slot near the center of the backplane to enable more efficient air flow within a rackmount computer chassis.Request a Quote
- BPG6600 Backplane Features
- BPG6600 Backplane Tech Specs
- BPG6600 Backplane Download Documents
The BPG6600 PCI Express Backplane
The SBC’s PCI Express links drive the PCIe card slots directly. An additional x4 PCIe link from the SBC enables a dual-channel PCIe-to-PCI-X bridge chip to interface the PCI-X slots into the system. The 32-bit/33MHz PCI slots are driven directly from the SBC’s optional edge connector D PCI interface. Twelve option card slots on this PCI Express backplane support PCIe, PCI-X and PCI plug-in I/O cards typically used in military and industrial automation platforms.
Key features of the BPG6600 PCI Express backplane include:
- Supports one PICMG 1.3 combo or graphics-class single board computer
- SBC slot located near the center of the backplane improves chassis air flow
- Supports two PCI Express and fourteen PCI-X/PCI cards
- 1 – x16PCI Express electrical / x16 mech. connector
- 1 – x1/x4 PCI Express electrical# / x8 mech. connector
- From IOB33 module on the SBC — link width is SBC dependent
- 2 – 64-bit/100MHz PCI-X
- 4 – 64-bit/66MHz PCI-X
- 4 – 32-bit/33MHz PCI
- One dual-channel PCIe-to-PCI-X bridge chip
- Long-life backplane with 7+ years of availability enhances system design stability
The BPG6600 PCI Express backplane is designed and manufactured in our ISO 9001:2008 registered facilities, supported from within the USA, and backed by a 5-year factory warranty.
14-slot factor, one segment
Board dimensions: 12.3” x 12.9”
The nominal backplane thickness is 0.080”; however, the backplane mounting holes are recessed 0.018” on the bottom to provide an effective PCB thickness of 0.062” for use in the chassis design process.
PCI Express Slots
One, x4/x1 PCIe slot (x8 mechanical) from a Trenton SBC via an IOB33 module
One, x16 PCIe slot (x16 mechanical) driven directly from SBC
Note: A TSB7053 SBC provides a x4 PCIe link to slot PCIe1 and a TQ9 or TML provides a x1 link
Four, PCI-X/PCI slots, 64-bit/66MHz
Two, PCI-X/PCI slots, 64-bit/100MHz
Four, PCI slots, 32-bit/33MHz
See datasheet or mechanical layout diagram for detailed slot routing information.
12.3″ x 12.9″
1 – x16 PCI Express 2.0/1.1 electrical / x16 mech. connector
1 – x4/x1 PCI Express 2.0/1.1 electrical# / x8 mech. connector
2 – 64-bit/100MHz PCI-X
4 – 64-bit/66MHz PCI-X
4 – 32-bit/33MHz PCI
#From IOB3x on SBC / link width SBC dependent
Single-processor SBCs: TSB7053, TQ9, TML
PICMG 1.3 Combo or Graphics Class with the 32-bit/33MHz PCI interface on SBC edge connector D
Agency Approvals & Compliance
Designed for UL60950 and CAN/CSA C22.2 No.60950-00
The BPG6600 backplane is available with low-profile right angle and vertical power connectors suitable for use with either an ATX or EPS power supply.
+5V, -5V, +5V AUX, +12V, -12V and +3.3V power connection and status
Operating Temp: 0°C to 60°C
Storage Temp: -20°C to 70°C
Humidity: 5% to 90% non-condensing