TRC4014 Industrial Chassis Downloads
If you need to speak to a Support Engineer about your specifications using the rugged TRC4014 Industrial Chassis, please do not hesitate to contact us by phone at (770) 287-3100, via chat, or fill out a form below.
We will walk you through each requirement and recommend the best option that suits your application.
|SBC or Motherboard|
|The TRC4014 is a rackmount chassis that features two 5.25″ vertical drive bays that may be populated with up to twelve storage drives. Board configuration options for this system includes either a single or dual-processor single board computer and a 14-slot backplane or a choice of either a uATX, or EATX embedded motherboard. This 19″ industrial rackmount computer features a lightweight, yet rugged design using a shallow depth 20″ aluminum enclosure. Power supply options include a fixed, single ATX/EPS or removable mini-redundant power supplies.|
|System Fan Control|
The FSC1400 simultaneously controls and monitors tach pulses from up to four system fans. The controller also accepts fan speed commands (including on/off) and provides individual pass/fail fan status via an I2C interface to the computer’s PICMG 1.3 system host board. Fan speed can also be based on temperature via the provided thermal sensor.
See the FSC1400 System Fan Speed Controller datasheet for additional details on system fan control operation.
|EIA RS-310C 19” Rackmount Standard|
|Lightweight Rugged Aluminum|
|19” Rackmount, 14-slot backplane or embedded motherboard system configuration options|
|Data Storage Capacity|
The maximum system storage capacity is drive type, individual drive capacity and system configuration dependent. The TRC4014 supports up to 8, 2.5″, 15mm or 12, 2.5″, 9.5mm thick drives in front access drive carriers. TRC4014 systems configured with 1TB HDDs could provide a storage capacity of up to 12TB, and about 6TB of storage capacity when using 2.5” SSDs.
Note: Maximum system storage capacity will increase as HDD/SDD storage capacity increases.
|Rear-mounted power supply options are available in the TRC4014 and they include:
Fixed, ATX/EPS up to 1500W
– OR –
Mini-redundant, ATX up to 800W
|3 – 92mm Fans (center-mounted),102 CFM each|
|LEDs for HDD activity, fan speed and system power status|
|Power On/Off and System Reset|
|Hold Down Bar|
|Flexible hold down bar for the SHB/SBCs and the option cards for added security in high vibration environments|
|Front tool-less access to the system filter for easy cleaning and maintenance|
|48.3cm (W) x 17.8cm (H) x 50.8cm (D) (with 19″ rackmount handles installed)|
|19.0″ (W) x 7.0” (H) x 20.0” (D) (with 19″ rackmount handles installed)|
|Chassis Net Weight|
23.2 Lbs. (9.08 Kg.) – includes chassis + dual-processor SBC + 14-slot backplane + mini-redundant power supply + a PCIe Ethernet LAN card
Final system weight is a function of the specific system configuration.