TVC4400 Video Wall Controller Downloads
If you need to speak to a Support Engineer about your specifications using the TVC4400 Video Wall Controller, please do not hesitate to contact us by phone at (770) 287-3100, via chat, or fill out a form below.
We will walk you through each requirement and recommend the best option that suits your application.
Standard Configuration – Single-Processor MicroATX Embedded Motherboard (JXMS7031)
Optional Configuration – Dual-Processor MicroATX Embedded Motherboard (JXM7031)
The following CPU options are available for use with the JXMS7031 / JXM7031 motherboards:
|4GB system memory (installed) – expandable up to 48GB for the JXM7031 motherboard and 24GB for the JXMS7031 motherboard when using 8GB DDR3 Mini-DIMMs|
The standard TVC4400 configuration features a single processor JXMS7031 motherboard configuration is available to support two Mura cards with the inter-card transfer capability. An optional configuration includes the dual-processor JXM7031 motherboard with support for up to three Matrox Mura MPX Series video controller boards. An additional 32-bit/33MHz PCI card slot is available for use with the TVC4400. All option cards in this system can be full-height boards that install vertically thereby eliminating the need for a riser card.
The flexible enclosure design allows the TVC4400 video controller to be mounted in different orientations and a wide variety of locations. This shelfmount / wallmount video controller features front access / hot swap storage drives that bring a level of local data storage to video display wall applications.
|8 cubes / screens / projectors
– AND –
8 video input devices
|2 – Matrox Mura MPX Series (std.)|
|Option Card Slot Details|
The standard, single-processor motherboard (JXMS7031) used in the TVC4400 controller design features four mechanical card slots with two PCIe slots available for use with the Matrox Mura MPX video controller cards. An additional PCI card slot is also available. This standard controller configuration supports video display walls that have up to eight-cubes.
An optional TVC4400 configuration supports the dual-processor JXM7031 motherboard with all four option card slots available for use in the application. This TVC4400 configuration supports up to three Matrox Mura MPX boards using the dual-processor motherboard’s three x16 mechanical PCI Express 2.0 card slots. The dual-processor motherboard configuration supports up to 12-cubes in a video display wall, but without the Mura card’s inter-card transfer* capability. Like the single-processor motherboard configuration, the additional 32-bit / 33MHz option card slot is available for customer use.
Both motherboard configurations support full-height option cards that are easily accommodated in the TVC4400 enclosure without the need for a riser card.
Trenton’s JXMS7031 / JXM7031 embedded motherboard enables support for two or three Matrox Mura MPX Series video controller boards*. The motherboard supports the following option card interfaces:
*Inter-card transfers between Matrox Mura’s MPX cards are not supported with the TVC4400’s optional dual-processor motherboard configuration.
This compact enclosure offers flexible mounting options for video controller mounting above or below a shelf or on a wall.
TVC4400 mounting brackets may be attached to the video controller in multiple locations to enable horizontal or vertical shelf, control cabinet wall, operator console, and OEM video display wall mounting.
|Lightweight Rugged Aluminum Enclosure|
The standard TVC4400 video controller features the Trenton JXMS7031 single-processor embedded motherboard. This MicroATX motherboard option supports one, long-life Quad-Core Intel® Xeon® C5500 Processor to enable a robust shelfmount or wallmount video display wall controller solution.
The enclosure construction of the TVC4400 supports full-height option cards installed vertically.
An optional TVC4400 video controller configuration support the JXM7031 dual-processor embedded motherboard.
1 – Front access HDD bay may be used to support either 1 – 3.5″ or 2 – 2.5″ hot swap storage drives
1 – Slim-line optical media drive bay
Note: 1 – 500GB storage drive (installed) — Additional drives and larger drive capacities available upon request
1 – 1U, EPS, 550W, 90-264 VAC full range
Additional power supply options are available upon request.
|2 – 92mm Fans (front-mounted)|
|Front LEDs for HDD activity and Power Status|
|Front Connect Ports|
|2 – USB|
|1 – Power On/Off
1 – System Reset
|Front access system filter requires no tools for fast and easy filter cleaning and maintenance.|
|26.67cm (W) x 17.68cm (H) x 30.76cm (D)|
|10.50″ (W) x 6.96″ (H) x 12.11″ (D)|
|Chassis Net Weight|
15.0 lbs. (6.81 Kg.) includes chassis, JXMS7031 motherboard, and 1U EPS power supply only
Note: Final system weight is a function of your specific TVC4400 video controller configuration