TRC4013 Industrial Chassis Downloads
If you need to speak to a Support Engineer about your specifications using the rugged TRC4013 Industrial Chassis, please do not hesitate to contact us by phone at (770) 287-3100, via chat, or fill out a form below.
We will walk you through each requirement and recommend the best option that suits your application.
|SBC and select shoebox backplanes|
|The TRC4013 rackmount computer features two complete computer systems within one rugged yet lightweight, 4U aluminum chassis. System configuration options include, Trenton’s dual-processor BXT7059 or single-processor TSB7053 single board computers, and a selection of shoebox form-factor backplanes. The TRC4013 system can support as many as two, 2.5” hard drives mounted in front-access drive carriers and one optical media drive in each SBC/backplane segment. System configuration flexibility is designed into the TRC4013 to support alternate processors, backplanes, data storage and system memory options.|
|System Fan Control|
The FSC1400 simultaneously controls and monitors tach pulses from up to four system fans. The controller also accepts fan speed commands (including on/off) and provides individual pass/fail fan status via an I2C interface to the computer’s PICMG 1.3 system host board. Fan speed can also be based on temperature via the provided thermal sensor.
See the FSC1400 System Fan Speed Controller datasheet for additional details on system fan control operation.
|EIA RS-310C 19” Rackmount Standard|
|Lightweight, rugged aluminum|
|4U, two-in-one rackmount computer with two long-life single board computers and backplanes that support PCI Express and PCI-X option cards|
|Data Storage Capacity|
|The maximum data storage capacity of the TRC4013 is dependent on drive type and individual drive capacity. System configurations are available to support up to 2, 2.5″, 15mm or 4, 2.5″, 9.5mm thick drive carriers.
Systems configured with 1TB HDDs could provide storage capacity of up to 4TB and about 2TB when using 2.5” SSDs. Maximum system storage capacity will increase as HDD/SDD storage capacity increases.
|1 – ATX, 400W, 90-264 VAC full range, 1U, rear-mounted and removable per segment|
|3 – 92mm Fans (center-mounted), 102 CFM each|
|Each segment has front-panel LEDs for HDD activity and system power status. A front-panel single LED monitors the system-wide fan speed control status.|
|Each segment has switches for Power On/Off and System Reset|
|Hold Down Bar|
|Flexible hold down bar for the SHB/SBCs and the option cards for added security in high vibration environments|
|Front tool-less access to the system filter for easy cleaning and maintenance|
|48.3cm (W) x 17.8cm (H) x 51.2cm (D) (with 19″ rackmount handles installed)|
|19.0″ (W) x 7.0” (H) x 20.15” (D) (with 19″ rackmount handles installed)|
|Chassis Net Weight|
36.8 Lbs. (16.7 Kg.) – includes chassis + 2, single-processor SBCs + 2, shoebox backplanes + 2, 1U ATX power supplies only
Final system weight is a function of the specific system configuration.