TVC2404 Video Wall Controller Downloads
If you need to speak to a Support Engineer about your specifications using the TVC2404 Video Wall Controller, please do not hesitate to contact us by phone at (770) 287-3100, via chat, or fill out a form below.
We will walk you through each requirement and recommend the best option that suits your application.
|Single Board Computer|
*Matrox validated configuration option
These long-life, advanced server, Ivy Bridge processors feature a 5GT/s DMI interface to the board’s C206 PCH. *Matrox validated configuration option
These long-life, Jasper Forest processors feature a 2.5GT/s DMI interface to the board’s 3420 PCH.
These long-life, Ivy Bridge-EN processors feature a 5GT/s DMI2 interface to the board’s C604 PCH.
Consult Trenton for additional processor options.
|The TVC2404 is a 2U rackmount video controller that supports up to three of the latest x16 PCIe video cards used in advanced display wall applications that require a compact, yet powerful video wall controller. The TVC2404 when paired with the TSB7053 single board computer is a Matrox validated video controller configuration capable of supporting up to three Matrox Mura MPX Series video controller boards. The TVC2404 features a Trenton single board computer such as the single processor TSB7053, JXTS6966 or BXTS7059 or the dual processor JXT6966 or BXT7059. The video controller features the BPC8219 2U butterfly form-factor backplane with its multiple x16 electrical interfaces. Video controller storage options support up to two front access / hot swap storage drives. A redundant system power supply reliably supports multiple video card types.|
|12 cubes / screens / projectors AND 12 video input devices|
|3 – x16 PCIe cards (Backplane Side B)
An additional PCI Express x16 mechanical card slot is available on the SHB-side of the backplane and may be available for use in select video controller applications. This slot availability is dependent on the option card dimensions and the SHB heat sink height.
|Option Card Details|
One, x4 PCIe slot (x16 mechanical) driven directly from SBC
Three, x16 PCIe slots (x16 mechanical) driven from a 64-Lane, 16-Port PCIe Gen2 switch.
|EIA RS-310C 19” Rackmount Standard|
|Lightweight, rugged aluminum|
|19″ Rackmount Video Controller, 2U enclosure height, single or dual-processor single board computer with a BPC8219 backplane in a lightweight, rugged aluminum enclosure with front access HDD/SDD drive carriers, a slim-line optical drive, front panel USB ports with rear panel I/O ports and PCI Express option card slots
Available SBC and BPC8219 backplane combinations in the TVC2404 supports up to three, x16 PCI Express video controller boards
|A front removable and hot swap 3.5” drive bays support up to two 2.5″ HDD/SDD carriers and 1 – Slim-line device bay for optical drive media|
|2U rear-mounted 90-264VAC redundant ATX/EPS|
|3 – 80mm Fans (center-mounted), 67CFM each under system speed control via fan tach pulse feedback, single board computer speed control commands and/or the speed controller board’s thermal sensor|
|LEDs for HDD/SDD activity and Power Status|
|Front Connect Ports|
|Front: 2 USB
Rear: 2 – Ethernet LANs, 2 – USB and 1 – VGA Video, 4 – Option Card Slots
Additional rear panel I/O available when using the single board computer’s optional IOB33 module.
|Power On/Off and System Reset|
|48.3cm (W) x 8.9cm (H) x 45.7cm (D) (with 19″ rackmount handles installed)|
|19.0″ (W) x 3.5” (H) x 18.0” (D) (with 19″ rackmount handles installed)|