TVC5401 Video Wall Controller Downloads
- Data Sheet
- Data Sheet for the JXTS6966 Motherboard
- Data Sheet for the BPG8032M Backplane
- Chassis Drawing
- Configuration Details
If you need to speak to a Support Engineer about your specifications using the TVC5401 Video Wall Controller, please do not hesitate to contact us by phone at (770) 287-3100, via chat, or fill out a form below.
We will walk you through each requirement and recommend the best option that suits your application.
The TVC5401 comes standard with the following Intel® processor:
Contact Trenton for additional processor options.
All Intel® Xeon® Processor EC5500 Series Processors (Jasper Forest) support Intel® VT-x2 and Intel® VT-d2
|The UL-recognized TVC5401 5U video controller supports up to fourteen Matrox Mura MPX Series controller boards used in advanced display wall applications with large data storage requirements. The TVC5401 features a Trenton JXTS6966 single board computer and BPG8032M PCI Express 2.0 backplane, up to eight front access / hot swap storage drives and an N+1 system power supply. The AMA5401 version of the TVC5401 video wall controller is CCC approved for use in China.|
|56 cubes / screens / projectors (max)
– AND –
56 video input devices (max)
|14 – Matrox Mura MPX Series (max)|
|Agency Approvals & Compliance|
The TVC5401 system is a UL recognized product listed in file #E208896-A2-UL dated 2013-02-28. Full UL test report available upon request.
The AMA5401 version of the TVC5401 video wall controller is CCC approved for use in China. Contact Trenton for ordering details for this version of the controller that is only available for sale in China.
|Option Card Slot Details|
The TVC5401 video controller features the Trenton BPG8032M backplane. This 20-slot form factor backplane supports one single-processor PICMG 1.3 SHB such as the JXTS6966 and up to seventeen PCI Express Gen 2.0 option cards. An additional x16 mechanical card slot is driven with a x4 PCIe link from the system host board and can be used to support general purpose I/O cards. PCIe Gen 1.1 option cards are also supported in the TVC5401. All eighteen option card slots use x16 PCIe mechanical connectors with seventeen of these slots driven with x16 PCI Express electrical interfaces. The TVC5401 has been validated by Matrox Graphics to support up to 14 Matrox Mura MPX Series video controller boards.
Backplane Type: PICMG 1.3 Graphics-Class
Note 1: Backplane slots PCIe2 through PCIe18 may operate as PCIe 2.0 slots depending on the end point devices installed into these slots and regardless of the system host board x16 root link type.
Note 2: Backplane slot PCIe1 operates as x4 PCIe 1.1 slot when using an SHB such as the JXTS6966.
|EIA RS-310C 19” Rackmount Standard|
|Lightweight Rugged Aluminum Enclosure|
19″ Rackmount Video Controller, 5U enclosure height, single-processor, JXTS6966 single board computer with a BPG8032M backplane in a lightweight, rugged aluminum enclosure with and N+1 power supply, four front access HDD drive carriers, two internal drive storage bays, a slim-line optical drive, front panel USB ports with rear panel I/O ports and PCI Express 2.0 option card slots
JXTS6966 single board computer and BPG8032M backplane combination supports up to seventeen, x16 PCI Express video controller boards such as the Matrox Mura MPX Series cards.
4 – 3.5″ drive bays support up to eight 2.5″ HDD carriers, removable and hot swap are available upon request. 1 – Slim-line device bay for optical drive media. Other drive bay configurations are available upon request.
Note: 1 – 500GB storage drive (installed) — Additional drives and larger drive capacities available upon request
|1485W, N + 1|
|4 – 92mm Fans (center-mounted), 102 CFM each|
|LEDs for HDD activity and Power Status|
|Front Connect Ports|
Front: 2 USB
Rear: 2 – Ethernet LANs, 2 – USB and 1 – VGA Video, 18 – Option Card Slots
|Power On/Off and System Reset|
|48.26cm (W) x 22.23cm (H) x 58.42cm (D) (with 19″ rackmount handles installed)|
|19.0″ (W) x 8.75” (H) x 23.0” (D) (with 19″ rackmount handles installed)|